Showing posts with label IIS (Internet Information Service) SP2. Show all posts
Showing posts with label IIS (Internet Information Service) SP2. Show all posts

Monday, 29 December 2014

// // Leave a Comment

Useful Shortcut of VMware


VMware is the application which enable to install the multiple virtual windows on single computer. You can use useful VMWare Shortcut for operate the virtual machine.

VM Ware Option  Shortcut Key
Setting Host + S
Take Snapshot Host + T
Take Screenshot Host + E
Session Information  Host + I
Insert Ctrl + Alt + Del  Host + Del
Pause  Host + P
Reset Host + R
ACPI Shutdown Host + H 
Close  Host + Q
Screen to Full Screen  Host + F
Switch to Seamless Mode Host + L
Switch to Scale Mode  Host + C
Auto Size Guest Display  Host + G
Adjust Window Size Host + A
Install Guest Additional Host + D

* The  Host is belong to Right side Ctrl 
Read More

Wednesday, 1 October 2014

// // Leave a Comment

Make you Windows 7 Boot and Shutdown Faster


It's very good news if your laptop and PC have slow booting and shutdown, so simply put, this little collection of tools will help you to gain control on quicker start times, internet confirmation, shut down times as well as throwing in some performance improvements.  As a bit of a start though, lets discuss two of the largest causes of a lengthy boot time on a computer, automatic updating and virus programs.  A great many programs leave files in your startup folder and automatically set themselves to automatic updating on installation.  Automatic updating can increase your boot time by 6-60 seconds, and more, depending on what you have installed.

For example, I use a great optimization utility called Advanced System Care which does a great job keeping my system clean.  It only get used when I choose so I never considered that it would be the cause of a 7-8 second delay in my start time.  It turns out that, in the programs Options menu, there are two check boxes, one for starting the program automatically at start up and the other for automatic updating.  I simply unchecked them and got that time back but who knew right?

The other consideration that I mention has to do with finding the right virus program.  I like freeware myself and have had the opportunity to check the start times of four programs in the past while.  Was I surprised to find that the best program started in the least amount of time was 5-6 seconds while at least two others chocked 10-15 seconds on to the boot time.


A. Configuration File Adjustment

The Configuration File can be found by pressing the WinKey + letter ’R’ simultaneously which will bring up the Run command. From there, type ‘msconfig’ into the box and press enter. While here we are going to perform a few changes to decrease our boot time:
Check  No GUI Boot which will stop the colorful opening ceremonies of the software and save you precious seconds at start up as will these others;
Reduce the Delay time to 3 seconds;
Choose Advanced options and select 2 for the number of processors if you are fortunate to have such; and
Click on OK followed by Apply and then agree to restart your computer.

B. Remove any Unused and Unneeded Services

Windows 7 running services can potentially be the main cause for slow start and performance in a computer system. Many of the services are never used by the computer as the general settings are meant to cover any number of computers and their configurations. On first seeing the Service Applet, the columns will show the name of each service, description, status and start-up type. The user needs to carefully consider the properties of each one to determine if it needs to be running or not. The safest method of approach is to set services to manual, when unsure, rather than to disable them.

So, simply press WinKey + ‘R’ to again bring up the Run Command and type in ‘services.msc’ before pressing OK. Double clicking on any service will help in determining if it is useful or not as well as changing its properties.

Some services that start automatically, by default, that can be disabled are:

• Computer Browser
• Distributed Link Tracking Client
• IKE and AuthIP IP Keying Modules
• Offline Files
• Remote Registry
• Tablet PC Input Service (If you are not using a tablet)
• Windows Error Reporting

You can experiment carefully with some services and I would suggest only a few at a time and then return if something doesn't work as planned or there are adverse results.


C. Eliminate Unneeded Start Up Programs

Start Up programs, as with Windows Services, have the ability to slow your system down a great deal. Start Up programs are a bit more obvious to the typical user however. Many software programs, on installation, embed files within the Start-up folder that are running behind the scenes needlessly. Quick Time is famous for this as is MS Office, however, MSN Messenger and the many communications programs that start automatically are a better example.  My best suggestion is to choose quicker boot times rather than starting frequently used programs automatically.

To examine your Startup, press WinKey + ‘R’ and type ‘msconfig’ and OK. From there select Startup and examine the running files. Again, determining what you can shut down may take a bit of work, however, my policy is that if I can start it when I select the program, there is no need for its files to be running all the time and slowing my system.


D. Remove Unused Fonts

I have just counted and was astounded to learn that there were a total of 708 fonts installed on my computer by Windows 7 taking up a whopping ½ GB of space, all but three of which I may never use. Windows loads each and every one of these fonts at boot up and must keep track of them, thus slowing your system. Feel free to cut down on the total number by simply deleting them. Go to Start Menu/Control Panel/Fonts.


E. Get Quicker Internet Confirmation

There is a quick trick to getting your internet to confirm quicker on boot. Press Winkey + ‘R’, type in ‘services.msc', double click and disable Workstation.

PRECAUTION: This tweak is not advisable if your system is located within a network or workstation environment as it will affect the environment itself.


F. Speed Up Your Shut Down Time

Windows 7 allows you to control your shut down time and allows it to be set from instantaneous to a 20 second delay. In considering this, your work habits need to be thought of and whether or not there is data being saved on exit. My shut down time is set at 2 seconds which I find a perfect setting as I hate waiting for a computer to shut down. We need to go into the Registry for this one so buckle up!
Press Winkey +’R’ and type ‘Regedit’ which brings you to the Registry Editor;
Follow” HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control and then look to the right to find WaitToKillServiceTimeOut and double click on it. You can enter a value from 2 to 20000, each value representing a millisecond. Two seconds would be 2000; and
Again click OK and then simply exit the program; it will be saved automatically.
Read More

Monday, 24 March 2014

// // Leave a Comment

How to login Multiple User in One Computer in Windows XP


This is really superb solution to use single computer by multiple user, in built RDP (Remote Desktop Protocol) provide to access the computer remotely but it has a limited only single user can be take a remotely at a time.

Typically, if you were logged in with RDP on a computer, if someone else tried to remote into that computer at the same time, you'd be bumped off. There are a couple of cases where you might want or need simultaneous RDP sessions. You and your partner could both access a home computer's programs and files while at work, for example. Or, as TechSpot suggests, you could have a dedicated Media Center PC in the living room and remotely access all the files on the computer without interrupting someone watching TV.

This patch will enable two or more concurrent sessions in Windows XP PRO Service Pack 2 (SP2) and Service Pack 3 (SP3) if you have FAST USER SWITCHING enabled, and your windows is NOT in a domain.

Uninstaller is also included and can be found at windows Control Panel -> Add or Remove Programs.

Download Installer - Windows XP 


Read More

Wednesday, 5 February 2014

// // Leave a Comment

How to Disable SmartScreen Filter in Windows 8?

"SmartScreen" filter was introduced by Microsoft in Internet Explorer 8 (IE8) web browser. It was developed to provide better security to IE users. SmartScreen filter automatically checks websites and files for malicious content and warns you if it finds something suspicious. SmartScreen filter is also present in IE9 and IE10 versions.

Microsoft has implemented the same mechanism in its latest OS Windows 8. Windows 8 comes with SmartScreen filter enabled by default. If you try to run a downloaded program from Internet, it checks the file and if it finds an unrecognized app, it blocks the program and shows following message on screen:

Windows protected your PC


Windows SmartScreen prevented an unrecognized app from starting. Running this app might put your PC at risk.


If you click on OK button, the program execution is terminated. If you are sure that the program is safe, you can click on "More info" link given in the message and it'll provide 2 buttons: "Run anyway" and "Don't run".



You can click on "Run anyway" button to launch the program.

Although its a good security feature in Windows 8 but many times you might find it a little annoying. SmartScreen filter shows the same warning message for almost all 3rd party programs which are downloaded from Internet.

If you have a good antivirus program and if you think the downloaded programs are safe, you can disable this SmartScreen feature in Windows 8 to remove these irritating warning messages.

Just follow these simple steps to turn off SmartScreen filter in Windows 8:

1. Open Control Panel and click on Action Center icon. Alternatively you can open it by typing Action Center at Start Screen and it'll show it in Settings section of search results page.

2. Now click on "Change Windows SmartScreen settings" link given in left sidebar.



3. It'll open SmartScreen settings window. Now you can select "Don't do anything (turn off Windows SmartScreen)" option and click on OK button.



4.That's it. It'll immediately turn off SmartScreen feature and you'll no longer get the warning message in Windows 8.
Read More

Tuesday, 12 November 2013

// // Leave a Comment

5 Ways to Access Your Files From Anywhere

5 Ways to Access Your Files From Anywhere


Having remote access to your computer or files from anywhere means you never have to worry again about forgetting an important file. You can travel lightly and also do business from just about anywhere you have an Internet connection. Here are several ways to access your files from the road ... and even remotely control or manage your computer from afar.

1. Use Remote Access or Remote Desktop Apps

One of the simplest ways to remotely access your computer is to use one of the many free or subscription-based programs that set up the connection for you. These programs let you log into your home computer from a Web browser on the remote computer (e.g., a workstation at the office or cybercafe) -- or, in some cases, even from an app on a mobile device like a smartphone or the iPad -- and work on your home computer as if you were sitting in front of it. The most popular remote access programs include:

LogMeIn: offers both a free version that works with Windows PCs and Macs for remote desktop control as well as a Pro version that also enables file transfers, remote printing, and more.
GoToMyPC: is a subscription-based service from Citrix starting at $19.95 per month for one computer (Mac or PC). GoToMyPC offers similar advanced features, like drag-and-drop file transfer, that the paid LogMeIn Pro version includes. There's a free trial, so you can compare GoToMyPC with the free version of LogMeIn to see which works better for you.
UltraVNC: is a free, very configurable program that uses VNC (Virtual Network Computing) technology for remote desktop sharing. It offers many advanced features like special graphics drivers, encryption plugins, and Windows authentication, but can be more complex to configure.

2. Share Files with a NAS (Network Attached Storage) Device 

If you don't need to remotely control or manage your home computer and just want to be able to access shared files over the Internet, you can use a NAS device (a.k.a. NAS box) to do so. These storage devices are mini file servers that you connect to your home network, usually via Ethernet cable to your home router. They run about $200, but it may be a very useful investment; NAS devices are great for file sharing and backups for multiple computers, and they typically offer remote file access via FTP or even your Web browser, depending on the device. Popular NAS boxes that let you access your files remotely include: Buffalo Linkstation and Apple's Time Capsule.

(More: About's Guide to Wireless/Networking has a selection of entry-level NAS products for home users as well as an Introduction to NAS.)

3. Add an External Hard Drive to Your Home Router

Another remote file sharing option would be to add an external hard drive to your existing (or a new) home router -- if your router has the capability to enable file sharing, that is. The Netgear WNDR3700 Router, for example, is a wireless dual-band (offers both 802.11b/g and 802.11n) router with a "ReadyShare" feature for sharing a USB storage device over the network and via FTP. The Linksys Dual-Band WRT600N is a similar router with network storage capabilities. Although using an external hard drive connected to your router will be slower than a dedicated NAS, this option may be less expensive if you already have an external drive to use and/or the router.

4. Use Online Backup and Syncing Services

For remotely accessing files from anywhere without having to set up any hardware, turn to cloud computing services, specifically online backup and file syncing Web apps. Online backup services provide automatic offsite (essential!) 

storage of your files and typically also allow you to download individual files from a Web browser or mobile app. Carbonite, Mozy, CrashPlan, and BackBlaze are a few online backup services to look at. As PC World points out, there are also additional options for low-cost backup, including using your Webmail or Web hosting service to store 

files online -- and these can also give you remote access to your files.

Dedicated file syncing services and applications are specifically designed to always keep your most important documents with you or accessible wherever you go. Dropbox and SugarSync automatically mirror a folder or several folders on your computer to their online servers. It's like having a file server in the cloud; you can share files with others and, in some cases, even edit files in your browser and sync with mobile devices.

5. Set Up Your Own Home Server

Finally, if you don't want to use a third-party solution and would rather set up your own VPN and server, both Apple Mac OS Server and Windows Home Server claim to make home or small business networking and remote access easy. 

(And of course there are many different Linux Server flavors; most of the NAS devices run on Linux.) This option is the most expensive and time-consuming to set up, but offers you the most control.
Read More

Saturday, 2 March 2013

// // Leave a Comment

How to open OXPS file in Windows 7


You cannot open an .oxps file on a computer that is running Windows 7 or Windows Server 2008 R2. More specifically, a program that can open the .oxps file is not installed on the computer.

Note The .oxps format is the default XPS document format in Windows 8. Typically, .oxps files are created when users print to a Microsoft XPS Document Writer (MXDW) printer on a computer that is running Windows 8.

ith Windows 8, Microsoft introduced the Oxps (Open XML Paper Specification) file format, which is similar to the default XPS format that gets created when you send a document to the Microsoft XPS Document Writer (MXDW) printer.
Windows 7 supports only the previous XPS file format and doesn’t allow you to open the Oxps file format. While in windows 8, .oxps format is the default XPS document format. Microsoft has released and OXPS to XPS File Converter that would convert the .oxps files to the .xps file format.

Note :
You must be running Windows 7 Service Pack 1 (SP1) or Windows Server 2008 R2 Service Pack 1 (SP1) for this update to work.
To start the download from microsoft website, you need to pass the genuine windows validation test as its available as an update for windows 7 systems.
If you’ve turned on Automatic Updates in Windows 7, you might have already installed this tool as an update (KB2732059).

Solution :

1.Online Convert in PDF file 

Read More

Monday, 1 October 2012

// // Leave a Comment

How to Install IIS without Windows CD (SP2, SP3)


-->

IIS (Internet Information Server) is a group of Internet servers (including a Web or Hypertext Transfer Protocol server and a File Transfer Protocol server) with additional capabilities for Microsoft's Windows NT and Windows 2000 Server operating systems. IIS is Microsoft's entry to compete in the Internet server market that is also addressed by Apache, Sun Microsystems, O'Reilly, and others. With IIS, Microsoft includes a set of programs for building and administering Web sites, a search engine, and support for writing Web-based applications that access databases. Microsoft points out that IIS is tightly integrated with the Windows NT and 2000 Servers in a number of ways, resulting in faster Web page serving.

For Installing the IIS without Windows CD in your computer (XP Only), Therefore you have to download IIS package from below link 

-->
Download Link  IIS SP2 or IIS SP3

  1. After download the package extract the file.
  2. Then Go to Control Panel and select the "Add & Remove Program"
  3. When the window will open, then left side you have to select "Add & Remove Windows Components"
  4. Select the "IIS (Internet Information Service) and Check Mark and click the details you have to sure the complete component that will selected inside the (IIS) if no then select the all. 
  5. After that click the "Next" and when you will get the Pop-up to "Insert the Windows XP CD" then choose the extracted file path. Two or three time it will ask you that path. 
  6. In few minute your IIS installation will complete. 

-->
Read More